HD Front Mount Bench Bracket

This Front Mount Bench Support Bracket has been designed to provide heavy duty support for bench seating while maintaining a low profile. This bracket is commonly used in public, commercial, and residential applications where a floating bench is desired.

Load rating is 450lbs per bracket. The bracket does require a solid backing like doubled 2x4 or 2x6 wall studs, or header style framing in order to support this kind of load. It is critical that you plan ahead when building out your project to make sure your framing will support the weight you plan on applying to these brackets.

Mounting these brackets to a block or concrete wall is simple and does require special masonry screws or anchors.

Specifications -

• Dimensions:
  • Width 2.5” Wide
    
  • Sizes:
  • 10" x 6" bracket (recommended for 10" to 14" deep bench seat) 
  • 14" x 7" bracket (recommended for 14" to 16" deep bench seat) 
  • 16" x 9" bracket (recommended for 16" to 18" deep bench seat)
    
  • 18" x 10" bracket (recommended for 18" to 20" deep bench seat)
    
  • 20" x 12" bracket (recommended for 20" to 24" deep bench seat)
• Mounting Holes:
• Back: 6 countersunk holes sized for Heavy-Duty 1/4" wood screws (Included)
  
• Top: 6 through holes for securing bench seat if necessary (this hardware is not included)
• Material: Solid 1/4" American Steel with 1/4" Gusset
  
• Finish: Premium powder coated finish
  

Additional Information -

• Made in the USA
• Carrying Capacity: 450Lbs. per bracket
  
• Industrial powder coated finish
• Made to screw into 2x4 or 2x6 reinforced studs. Header, or masonry walls including block and cement. You must use fasteners designed for masonry applications when mounting to concrete, block, etc...
  

Uses -

• Support Benches
• Support Wall Mounted Bench Seats
  

Determine What Size & Quantity to Order?

• Standard Spacing: 16” to 24” apart
• We recommend that no more than 2" to 4" past edge of bracket should be unsupported.
  • Example: Say your bench is 18” Deep (18” - 2” = 16”) we would recommend a 16" x 9” Bracket to support that bench seat.
    
• Our brackets are listed as follows, depth x height measurements
  • Example: 16” x 9” Bracket
    • 16” (horizontally or depth)
      
    • 9” (vertically or height)