The Hammered Crescent Corbel is a practical iron bracket that's also decorative in a restrained way. This versatile corbel can be used to support your counter top overhang, heavy shelving,, fireplace mantels and more. Offered in two finish options--either Matte Black, or Matte Clear.
Note: This corbel has a 1/4" thick Hand Hammered Iron L bracket with 2 3/8-inch holes on the back plate and 2 3/8-inch holes on the top plate.
Bracket Size (Depth x Height x Width)
- 7-in x 9.5-in x 1.5-in
- 10.5-in x 13-in x 1.5-in
Iron Finish Options:Matte Clear
Mounting Hardware: Not Included - A total of 4, 3/8 inch diameter holes are drilled into the bracket. 2 holes on the back plate and 2 holes on the top plate.
Handcrafted in: America (USA)
Style:Rustic / Farmhouse
Room: Kitchen, Bar Room, Living Room, Garage, Basically any room in your home or cabin where you could use an iron support bracket.
Use: This corbel can be used as a granite counter top support, shelf brackets, bar brackets, mantel brackets and more.
Indoor / Outdoor: Indoor
Care: Wipe clean with a soft damp cloth.
Installation Corbels can be installed by a contractor/builder or a handy Do-It-Yourselfer. For detailed installation instructions please see "Installation" link below.
Structural Warranty Life Time (touch up paint available for scratches if that happens)
Determine What Size & Quantity to Order?
This information is provided by The Marble Institute of Americas published requirements for granite countertops.
What size corbel do I order?
- Your Countertop overhang should not extend past the corbel by more than 4 to 6 inches.
- Example: If your countertop overhang is 10-inches you will want a bracket that measures at least 5 to 6 inches deep.
- All our corbel measurements are listed as depth x height | Example: a 6" x 8" corbel is 6 inches deep and 8 inches high.
- Notes From a Designer: Corbels are meant to be seen. So they generally look best when they are 2/3 as deep as the countertop overhang itself. As an example, when we design countertop overhangs we will keep the end of the corbel 2-4" from the end of the countertop overhang. This does exceed the Marble Institutes requirements but it looks much better from a design perspective.
How many corbels do I order?
- Corbels are generally spaced 24 to 36 inches apart under countertop overhangs.
- To figure out how many corbels you need lets start with 2 corbels at each end of the countertop set 4" to 6" inches in, from the edge.
- Now measure the span left between the 2 end corbels and use the following formula: (span left) divided by (desired spacing).
- Example; an 84" wide countertop with 2 brackets set 4 inches from the end would leave you with 76 inches left to support; (84" - 8" = 76"). Now take 76" divided/by 24" = 3.1, so you would need 3 more corbels for a total of 5 brackets.
- For a countertop overhang spanning 84" wide with 2 corbels set in 4" from either side, and a 24 inch span between corbels, you would order 5 brackets total. 2 ends brackets and 3 to support the remaining 76" span.
- For a countertop overhang spanning 84" wide with 2 corbels set in 4" from either side, and a 36 inch span between corbels, you would order 4 brackets total. 2 ends brackets and 2 to support the remaining 76" span.